Airsys Unveils Arc90, a Thermal Management Architecture Designed to Allocate Up to 90% of Data Center Power to Compute
News originally published by
GlobeNewswireArc90 scopes and prices each project around a Power Compute Effectiveness (PCE) target of up to 0.90, combining air, liquid and hybrid cooling in one architecture rather than a list of equipment
WOODRUFF, S.C., Nov. 16, 2026 (GLOBE NEWSWIRE) -- Airsys, a global leader in thermal management for data centers, AI and high-performance digital infrastructure, today introduced Arc90, a novel thermal management architecture framework built around Power Compute Effectiveness (PCE), the power-allocation metric Airsys developed for the industry.
Under Arc90, thermal management infrastructure will be designed, validated and priced as one integrated outcome rather than a list of equipment, with every loop, control and component designed around a project PCE target of up to 0.90, subject to the facility boundary, redundancy basis, site conditions, electrical architecture and customer requirements. At that target, up to 90% of a facility’s provisioned electrical capacity would be allocated to IT compute.
Next-generation data center infrastructure has become a power-constrained challenge. New electrical grid interconnections can take years to secure, and every megawatt provisioned for cooling and additional overhead is one that cannot be allocated to compute. Much of this power allocation is determined during the design phase, long before a facility is built and operational. Arc90 is Airsys’ framework for getting that decision right from the start.
The launch marks a company-wide shift in how Airsys plans to design, deliver and support mission-critical thermal management infrastructure. Rather than quoting individual components, Airsys will scope each Arc90 project as an optimized architecture for a specific site, drawing on its full portfolio of air, liquid and hybrid cooling, and price it against its PCE target. An Arc90 engagement combines site-level thermal modeling, PCE-based architecture design, equipment selection, controls integration, commissioning, performance validation and lifecycle optimization within a defined facility boundary.
Airsys is introducing Arc90 as an architecture framework and is currently developing Arc90 reference designs, which will be shared with customers and partners.
“The race to build AI infrastructure is now a race for power,” said Yunshui Chen, founder and CEO of Airsys. “The choices made before construction begins decide how much of that power is ever set aside for compute. Arc90 is how we intend to answer that question with our customers from the first drawing: one architecture, designed and priced around the outcome rather than a list of equipment.”
Arc90 also extends Airsys’ long-standing focus on energy efficiency and sustainability. Its design principles pair power allocation with environmental responsibility by allocating more of a site’s provisioned power to compute rather than facility overhead, eliminating evaporative water use, and easing the grid and water demands that increasingly shape community concerns about data center growth. Those goals reflect the commitment behind the Airsys slogan, Balance the Environment.
“In a power-constrained data center industry, every watt freed from physical infrastructure for AI computing is a win. PCE brings that priority into the design process, focusing on how much of a facility’s provisioned power is available to IT rather than supporting infrastructure,” said Vlad Galabov, independent data center analyst and host of The AIDC Debate. “Liquid cooling can help reduce cooling power demand, but capturing its full potential requires creative, whole-system thinking. Airsys is taking the right approach by treating cooling as a holistic challenge, addressing both new builds and retrofits of existing facilities.”

Five product lines, one architecture
Arc90 is planned as the thermal management architecture standard across Airsys’ five product lines, so each design can draw on the mix of technologies a specific site needs:
- PowerOne: data center thermal management and high-density infrastructure.
- LiquidPack: retrofit liquid cooling for existing facilities.
- EdgeOne: pre-engineered modular thermal management for edge, telecom, UPS and distributed sites.
- Aegis, an Airsys company: chip- and component-level thermal management, including cold plate cooling and two-phase direct-to-chip cooling now in development.
-
ComfortOne: K–12 and commercial comfort thermal management.
For existing air-cooled facilities, Airsys plans to apply Arc90 principles through LiquidPack, its retrofit liquid-cooling platform. LiquidPack is the new name for Airsys’ direct-to-server liquid spray cooling platform, designed to convert servers already inside air-cooled halls to single-phase liquid cooling and raise rack density within the existing footprint. Airsys is engaging server OEMs, hyperscalers and colocation operators on instrumented trials, each benchmarked on PCE using provisioned values before and after retrofit.
For the highest-density processors, Aegis, an Airsys company, is developing two-phase direct-to-chip cooling built around a 3D-printed cold plate. Additive manufacturing makes it possible to build internal structures that conventional machining cannot, so the cold plate can be designed to increase the surface area where the coolant boils, guide vapor away from the chip and concentrate cooling on each processor’s hotspots. Those features are intended to help the two-phase system remove more heat from each chip while holding chip temperatures steady, supporting the rising power densities of next-generation AI processors.
How Arc90 works
Conventional data center thermal management treats every load the same, routing all loads through a single chiller plant operating at one setpoint and relying heavily on mechanical refrigeration. Arc90 replaces the single loop approach with a coordinated thermal management architecture designed around the PCE target, ensuring that each load is cooled at the temperature it actually requires while helping to maximize the power available for compute.
Arc90 design elements:
- Three thermal loops, matched to load. A high-temperature liquid loop uses dry coolers and coolant distribution units to deliver coolant to CPUs and GPUs. For compatible high-density systems, the loop is designed to capture approximately 80–90% of server heat at the source, and where climate and operating conditions permit, dry-cooler heat rejection can minimize or avoid compressor-based cooling for this load. A medium-temperature loop uses free-cooling chillers for residual air-side heat, and a low-temperature zone uses precision DX cooling for electrical rooms, UPS areas and support spaces. Design temperature ranges for each loop are detailed in the Arc90 technical white paper.
- Fewer chillers by design. Separating the high-temperature and medium-temperature loops means chillers are sized only for residual air-side heat rather than the full IT load. In Airsys design modeling, this approach can reduce required chiller capacity by up to 80% compared with a chillers-only design, freeing provisioned power for compute to raise PCE, lowering chiller-related capital costs and reducing reliance on long-lead-time chiller equipment to ease supply-chain constraints.
- Designed for zero evaporative water use. Arc90 is designed to a zero evaporative water use effectiveness (WUE) target.
- A project PCE target of up to 0.90. Each Arc90 design is engineered toward that target, subject to the facility boundary, redundancy basis, site conditions, electrical architecture and customer requirements.
-
Modeled results. In an Airsys design model for a hypothetical 60 MW facility in the southeastern United States, a chillers-only design reached a PCE of 0.74, while an Arc90 configuration targeted 0.90 under the same declared facility boundary and redundancy assumptions. That represents approximately 22% more provisioned power for compute within the same total provisioned facility power. Results depend on the model’s assumptions for climate, IT load, cooling architecture and electrical losses.
“With limited power availability and data center projects being so capital-intensive, the physical infrastructure goal is clear: deliver as much power as possible to compute in a reliable, efficient, and sustainable way,” said Moises Levy, PhD, CEO and Founder of DCMETRIX, and a seasoned engineer and data center subject matter expert. “Arc90 brings that vision to the design or retrofit phase, helping organizations get more value from every watt.”
Power Compute Effectiveness, explained
Airsys developed PCE to make stranded power visible on paper. PCE is the ratio of provisioned IT compute electrical capacity within a declared facility boundary to total provisioned facility electrical capacity under the declared redundancy basis, expressed as a value between 0 and 1. Because it uses provisioned values from design documentation, PCE evaluates how power is allocated before a facility operates.
In practical terms, a PCE of 0.90 means 90 MW of every 100 MW provisioned goes to IT compute, with 10 MW for cooling, electrical losses and other support loads. In illustrative legacy designs evaluated by Airsys, PCE can be approximately 0.70, meaning about 30% of provisioned power is assigned to cooling, electrical losses and other supporting infrastructure before a single server is installed. On a 100 MW site, closing that gap would shift about 20 MW from overhead to compute within the same total capacity.
PCE complements Power Usage Effectiveness (PUE). PUE measures how efficiently a facility uses energy in operation; PCE measures how provisioned capacity is split between compute and the cooling, electrical losses and auxiliary loads that support it. Airsys has shared the methodology openly, and the Open Compute Project (OCP) has published the company’s white paper detailing it.
“As power availability becomes a growing constraint on data center development, operators need to look beyond operational efficiency and consider how effectively they allocate their available electrical capacity,” said Rand Talib, research analyst at Uptime Institute. “Decisions made during the design phase determine how much capacity is reserved for IT equipment versus supporting infrastructure, with important implications for future expansion, infrastructure investment, and operational flexibility.”
Availability
Airsys will showcase Arc90 and LiquidPack at SC26 (Supercomputing), Nov. 16–20, booth 1744. The Arc90 white paper is available at airsyscooling.com. Operators, developers and partners interested in collaborating on early Arc90 reference designs can contact Airsys at marketing@air-sys.us.
ABOUT AIRSYS
Airsys is a global leader in mission-critical thermal management for high-performance digital infrastructure including data centers, AI, edge computing, telecom, medical imaging, and advanced manufacturing environments. Airsys combines more than 30 years of technical excellence designing and delivering thermal management solutions across all major architectures – air, liquid and hybrid – with a purpose-driven focus on energy efficiency and sustainability.
With its unique focus on higher Power Compute Effectiveness (PCE), Airsys helps customers allocate more of their provisioned power to compute. The company is headquartered in South Carolina, USA, and supports its global mission with 1,000+ employees across 16 global locations. For more information, visit airsyscooling.com.
A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/bc7953f5-451f-45da-9a78-031da44b9a1b

Media contact: Airsys Media Relations | Marketbridge (North America) airsys@marketbridge.com Omarketing (Europe) rose@omarketing.com
Legal Disclaimer:
EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.
